Products

Square column buckle

Short Description:

Exw Price : 720usd-910usd/Ton
Min.Order Quantity : 2tons
Packaging : Bag/Box With Pallet
Port : Tianjin/Qingdao/Shanghai/Ningbo
Delivery : 1-30days On Qty
Payment : T/T/Lc
Supply Ability : 500 Ton Per Month

Submit request

   

Product Knowledge

O1CN01tlrF5H21MJK0IfmtK_!!2213239776970-0-cib

Structural Components

Single-bend clamping plate: Generally made of Q345B high-strength steel plate, 2-4mm thick. One end of the clamping plate is bent, and the other end has several fixing holes for wrapping the four sides of the template and positioning it through these holes.

Wedges: Usually made of cast steel with a galvanized surface. They are inserted into the fixing holes of the clamping plate by hammering to achieve fastening and distribute the stress.

Limiting sleeves: Made of engineering plastic or galvanized steel, used to keep the clamping plate level and prevent it from shifting during reinforcement.

O1CN01vgq5td21MJJzUPT4H_!!2213239776970-0-cib

O1CN01zgsr3321MJJv3QTqn_!!2213239776970-0-cib

Specifications

Applicable range: Generally applicable to column diameters of 400-3000mm. Different sizes of square columns can be adapted by adjusting the hole positions or combining clamping plates.

Compressive strength: Under static load testing, compressive strength ≥300MPa.

Maximum load-bearing capacity: For a square column with a side length of 2000mm, the maximum load-bearing capacity can reach 800-1500kN.

Reusability: Under normal use and maintenance conditions, it can be reused ≥30 times.

Core Advantages

Highly Efficient Installation: With two people working together, a 4-meter-high square column can be reinforced within 20 minutes, significantly improving efficiency compared to traditional steel pipe reinforcement methods.

Cost Savings: No drilling is required for the formwork, increasing the number of formwork reuses by 3 times. Each set is reusable, reducing overall costs by approximately 60%.

Quality Assurance: Effectively controls the verticality deviation of the formed column, with a deviation ≤1/1000, ensuring the construction quality of the square column.